IP QoS Upstream Settings for the 2Wire 2701HG-D - QwestRouter Sceenshot
Advanced Setup - QoS - Upstream Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Tuesday, September 22, 2009 09:09:12 AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1536/640Kbps ISP Status: CONNECTED IP QoS Upstream Settings Enabling the IP QoS feature, allows for the prioritization of certain types of traffic (such as VoIP) before standard data traffic. Traffic shaping your network with QoS can also increase application performance and prevent your network from becoming overloaded. Follow Steps 1-7 below to setup IP QoS. 1. Select Qwest Default QoS or Custom QoS . QoS Type: Qwest Default QoS Custom QoS 2. Click "Apply" to save your settings. 2. Name the custom rule below. Then, set the desired priority and reserved bandwidth for the application. Name Priority High Medium Low List Hierarchy: 1 2 3 4 5 6 7 8 9 10 3. Select destination IP information. Destination IP: Destination IP Address: Destination Netmask: Destination TCP/UDP Port: Destination TCP/UDP Port: Destination Port Protocol: All UDP TCP 4. Click "Apply" to save your settings. QoS Rule List Name Priority Dest IP Range Dest Port Protocol EDIT Qwest Default QoS High - - - Copyright © 2008 Qwest Communications, Inc.