Remote Management for the 2Wire 2701HG-D - QwestRouter Sceenshot

Back to the 2Wire 2701HG-D - Qwest

Screenshots from

Advanced Setup - Remote Management Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help Tuesday, September 22, 2009 09:09:27  AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1536/640Kbps ISP Status: CONNECTED Remote Management If you want to access your Broadband Modem remotely, please turn Remote Management On. In order to enable remote management an Admin Password must be set. Remote Management is default set to port 443 for HTTPS access. If port 443 has been forwarded to a device on the LAN you will need to change the default remote management port below to allow for remote access. To access your modem remotely you will need to use https:// followed by the modem IP. 1. Set the remote management state below. Remote Management: Enable   Disable   2. Enter your Admin Password Admin Username: wra Admin Password:   3. Set the remote management HTTP and SSL port. Remote Management HTTP Port: Remote Management SSL Port:   4. Set the remote file share state below. Remote File Share: Enable   Disable   5. Set the remote management login protection below. Disable Remote Management After: Never Disable 3 5 10 15 20 30 Disable Remote Management For: Never Disable 5 min 15 min 30 min 1 hour 2 hours 4 hours 12 hours   6. Click "Apply" to save changes.   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-D - Qwest > Remote Management