Static Routing for the 2Wire 2701HG-D - QwestRouter Sceenshot

Back to the 2Wire 2701HG-D - Qwest

Screenshots from

Advanced Setup - Routing - Static Routing Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help Tuesday, September 22, 2009 09:09:36  AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1536/640Kbps ISP Status: CONNECTED Static Routing Enter the Static Route information below. 1. "Destination IP" is the IP Address of the route being defined. Enter the Destination IP below. Destination IP     2. "Subnet Mask" is the Subnet Mask of the subnet being defined. Enter the Subnet Mask below. Subnet Mask     3. "Gateway IP" is the IP address to the defined subnet. If the Gateway IP is local to the modem, this field can be empty. Enter the Gateway IP below. Gateway IP     4. Click Apply to save your settings.   Static Routes Destination IP Subnet Mask Gateway IP EDIT System Route System Route System Route System Route System Route System Route System Route System Route    Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-D - Qwest > Static Routing