Wireless Setup - Channel for the 2Wire 2701HG-D - QwestRouter Sceenshot

Back to the 2Wire 2701HG-D - Qwest



Screenshots from PortForward.com


Wireless Setup - Channel Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Tuesday, September 22, 2009 09:07:32  AM Basic Settings WEP WPA or WPA2 WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel CONNECTION STATUS: Qwest Broadband: CONNECTED 1536/640Kbps ISP Status: CONNECTED Channel To increase modem performance, change the channel and power level at which your modem communicates by following the steps below. 1. Select Channel. Channel: Auto 1 (2412 MHz) 2 (2417 MHz) 3 (2422 MHz) 4 (2427 MHz) 5 (2432 MHz) 6 (2437 MHz) 7 (2442 MHz) 8 (2447 MHz) 9 (2452 MHz) 10 (2457 MHz) 11 (2462 MHz)   (1-11)   2. Select Wireless Power Level. Wireless Power Level: 6% 12% 18% 25% 37% 50% 62% 75% 87% FULL   3. Click "Apply" to save your changes.   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-D - Qwest > Wireless Setup - Channel