Wireless Setup - WPS for the 2Wire 2701HG-D - QwestRouter Sceenshot

Back to the 2Wire 2701HG-D - Qwest



Screenshots from PortForward.com


Wireless Setup - WPS Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Tuesday, September 22, 2009 09:07:15  AM Basic Settings WEP WPA or WPA2 WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel CONNECTION STATUS: Qwest Broadband: CONNECTED 1536/640Kbps ISP Status: CONNECTED WPS (Wi-Fi Protected Setup) WPS is a standard for easy and secure establishment of a wireless home network. To enable WPS, follow the steps below. 1. Set the WPS state. WPS: Enable     Disable   2. Click "Apply" to save your changes.   Connecting a device with WPS PBC Push Button Configuration (PBC) Click "Connect" to connect a WPS device.   NOTE: The "Connect" button must be pressed within 120 seconds after initiating the WPS protocol on the wireless client device.   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-D - Qwest > Wireless Setup - WPS