Firewall Monitor for the 2Wire 2701HG-G - QwestRouter Sceenshot
Advanced Setup - Security - Firewall Monitor Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 10:52:46 AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED Firewall Monitor Firewall Monitor allows you to monitor the frequency and severity of the hacker attacks attempted against the firewall. Click edit below to adjust the attack threshold levels and to setup email notifications. You can set up to three notifications rules below. 1. Set the firewall monitor notification state. Firewall Monitor: Enable Disable 2. Select the rule number. Rule: 1 2 3 3. Select the firewall attack notification threshold. Risk Level: Select High Risk Medium Risk Low Risk Attacks: Select 1 5 10 15 25 50 100 Time Interval: Select One day One week 4. Click "Apply" to save your changes. Rule Number Risk Level Attack Thresholds Time Interval EDIT 1 High Risk 1 One day 2 Medium Risk 10 One week Attack Details Attack Alerts Attack Level Today Current Week High Risk 0 0 Med Risk 0 0 Low Risk 5 5 Total Number of Attacks 5 5 Top Attackers IP Address Source Domain High Risk Medium Risk Low Risk 188.8.131.52 bas1-niagarafalls05-2925405338.dsl.bell.ca 0 0 2 184.108.40.206 The system can automatically send you email notification upon detection of specific configured events and thresholds. The notifications feature requires configuration of an SMTP mail account in order for the system to send email to the email address you specify. 0 0 1 220.127.116.11 static-239.whsi.tv 0 0 1 18.104.22.168 pp01384571201.pndsl.co.uk 0 0 1 Email Notification Setup The system can automatically send you email notification upon detection of specific configured events and thresholds. The notifications feature requires configuration of an SMTP mail account in order for the system to send email to the email address you specify. 1. Set the Email notification state. Email Notification: Enable Disable 2. Set the outgoing SMTP server. Outgoing SMTP Server: 3. Set Authentication Parameters. Authentication State: Enable Disable Username: Password: 4. Set the notification delivery email address. Email Address: 5. Click "Apply" to save your changes. Copyright © 2008 Qwest Communications, Inc.