Static Routing for the 2Wire 2701HG-G - QwestRouter Sceenshot
Advanced Setup - Routing - Static Routing Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 07:48:36 AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED Static Routing Enter the Static Route information below. 1. "Destination IP" is the IP Address of the route being defined. Enter the Destination IP below. Destination IP 2. "Subnet Mask" is the Subnet Mask of the subnet being defined. Enter the Subnet Mask below. Subnet Mask 3. "Gateway IP" is the IP address to the defined subnet. If the Gateway IP is local to the modem, this field can be empty. Enter the Gateway IP below. Gateway IP 4. Click Apply to save your settings. Static Routes Destination IP Subnet Mask Gateway IP EDIT 127.0.0.1 255.255.255.255 127.0.0.1 System Route \ 255.255.255.255 \ System Route 192.168.0.1 255.255.255.255 192.168.0.1 System Route 18.104.22.168 255.255.255.255 \ System Route \ 255.255.255.255 22.214.171.124 System Route 192.168.0.0 255.255.255.0 192.168.0.1 System Route 127.0.0.0 255.0.0.0 127.0.0.1 System Route 0.0.0.0 0.0.0.0 126.96.36.199 System Route Copyright © 2008 Qwest Communications, Inc.