WAN IP Address for the 2Wire 2701HG-G - QwestRouter Sceenshot

Back to the 2Wire 2701HG-G - Qwest



Screenshots from PortForward.com


Advanced Setup - IP Addressing - WAN IP Address Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 07:50:00  AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address NAT Mapping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management Routing Static Routing Security Admin Username and Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings Firewall Monitor Advanced Firewall Configuration CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED WAN IP Address WAN IP Address changes the WAN protocol settings of the modem. The protocol settings are determined by your ISP. 1. Select the item below that is utilized by your ISP. PPPoE PPPoA RFC 1483 Transparent Bridging RFC 1483 via DHCP RFC 1483 via Static IP Encapsulation: RFC 1483 Bridged RFC 1483 Routed   2. Enter your PPP Username and Password. PPP Username PPP Password My ISP does not require a username and password.   2. Enter the ISP hostname and domain name (optional). Hostname: Domain Name:   3. Select the IP Type. Dynamic IP-DHCP(Default) Single Static IP Address Single Static IP Block of Static IP Addresses(Unnumbered Mode) Gateway Address(Unnumbered Mode): Subnet Mask(Unnumbered Mode): VIP Mode   3. Select the IP Type. Dynamic IP-DHCP(Default) Block of Static IP Addresses(Unnumbered Mode) Gateway Address(Unnumbered Mode): Subnet Mask(Unnumbered Mode): VIP Mode   2. Set the IP information. IP Address: Subnet Mask: Gateway Address:   4. Select the DNS type. 4. Set the DNS information. 4. Set the DNS information. Dynamic DNS Addresses(Default) Static DNS Addresses Static DNS Addresses Static DNS Addresses Primary DNS: Secondary DNS:   4. Select the DNS type. 4. Set the DNS information. Dynamic DNS Addresses(Default) Static DNS Addresses Static DNS Addresses Primary DNS: Secondary DNS:   3. Set the DNS information. Static DNS Addresses Primary DNS: Secondary DNS:   5. Select Encapsulation type. VC-Mux LLC/SNAP   5. Select Encapsulation type. VC-Mux LLC/SNAP   4. Select Encapsulation type. VC-Mux LLC/SNAP   5 . Click "Apply" to save your changes.   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-G - Qwest > WAN IP Address