Wireless Basic Settings for the 2Wire 2701HG-G - QwestRouter Sceenshot

Back to the 2Wire 2701HG-G - Qwest



Screenshots from PortForward.com


Wireless Setup - Basic Settings Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 07:51:23  AM Basic Settings WEP WPA or WPA2 WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED Basic Settings To enable and secure a wireless network follow the steps below. 1. Turn Wireless ON. Wireless: On   Off   2. Change the SSID setting to any name or code you want. SSID:   3. Secure your wireless network by clicking on the button next to  Auto WPA or WPA2 Auto WPA or WPA2  Off   4. Select a Key. Use Factory Default WEP key (64-bit) Create a Auto WPA or WPA2 Key. WPA-PSK and WPA2-PSK require either 64 hexadecimal characters or an ASCII “pass phrase” between 8 and 63 alphanumeric characters.   5. Click "Apply" to save your changes.   Copyright © 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-G - Qwest > Wireless Basic Settings