Wireless MAC Authentication for the 2Wire 2701HG-G - QwestRouter Sceenshot

Back to the 2Wire 2701HG-G - Qwest



Screenshots from PortForward.com


Wireless Setup - Wireless MAC Authentication Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 07:51:50  AM Basic Settings WEP WPA or WPA2 WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED Wireless MAC Authentication Limit access to the Qwest Broadband Modem by using the MAC address of specific wireless devices.   1. Set MAC authentication state. MAC Authentication: Enable     Disable   2. Select "Allow device" or "Deny device". Allow device list Denies all devices except devices added in step 3 Deny device list Allows all devices except devices added in step 3   3. Enter the MAC address of the device. Select MAC Address:   Manually Add MAC Address:   Manually Add MAC Address \ \ \ \ or     (Sample MAC Address: 00:20:e0:00:41:00) 4. Click "Apply" to save your changes.   MAC Authentication Device List   DEVICE NAME IP ADDRESS MAC ADDRESS ACCESS EDIT No Entries Defined   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-G - Qwest > Wireless MAC Authentication