Wireless SSID Broadcast for the 2Wire 2701HG-G - QwestRouter Sceenshot

Back to the 2Wire 2701HG-G - Qwest

Screenshots from PortForward.com

Wireless Setup - SSID Broadcast Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, August 12, 2013 07:51:28  AM Basic Settings WEP WPA or WPA2 WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel CONNECTION STATUS: Qwest Broadband: CONNECTED 1728/704Kbps ISP Status: CONNECTED SSID Broadcast When SSID Broadcast is enabled, any computer or wireless device using the SSID of "Any" can see your Qwest Broadband Modem. To block this, disable the SSID broadcast so that only those Wireless devices with your SSID have access. 1. Set SSID mode. Enable     Disable   2. Click "Apply" to save your changes.   Copyright 2008 Qwest Communications, Inc.
Home > Screenshots > 2Wire > 2701HG-G - Qwest > Wireless SSID Broadcast