Wireless Settings for the 2Wire 2701HGV-WRouter Sceenshot

Back to the 2Wire 2701HGV-W



Screenshots from PortForward.com


Home Network - Wireless Settings Site Map Home Summary Wireless Settings Advanced Settings   Configure the Wireless Network Settings Identify Network Network Name: Wireless Channel: Auto 1 (2412 MHz) 2 (2417 MHz) 3 (2422 MHz) 4 (2427 MHz) 5 (2432 MHz) 6 (2437 MHz) 7 (2442 MHz) 8 (2447 MHz) 9 (2452 MHz) 10 (2457 MHz) 11 (2462 MHz) Enable SSID Broadcast Enables the wireless network name to be broadcast publicly to any wireless users within wireless range of your network. Disabling the SSID broadcast makes the network name private and provides enhanced security by requiring wireless users to enter the network name manually when creating a wireless network profile on their computer. Wireless Security Enable Wireless Network Security Authentication: WEP-Open WEP-Shared WPA-PSK WPA-PSK and WPA2-PSK WPA2-PSK Use default encryption key Use custom pass phrase Key: MAC Filtering Click on the button below to configure your MAC filtering settings. Additional Settings (defaults recommended) Wireless Mode: 802.11b/g 802.11b 802.11g DTIM Period: Maximum Connection Rate: 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Power Setting: 1 2 3 4 5 6 7 8 9 10 Current Settings Access Point: Network Name: Channel: 11 (2462 MHz) Authentication: WPA-PSK Encryption: TKIP To locate the built-in, 10-digit wireless encryption key for your system, please look at the bottom of the product near the bar code label:
Home > Screenshots > 2Wire > 2701HGV-W > Wireless Settings