Wireless for the 2Wire 3600HGVRouter Sceenshot

Back to the 2Wire 3600HGV



Screenshots from PortForward.com


Home Services Settings Site Map System Info Broadband LAN Firewall Logs Diagnostics Status Wireless Wired Interfaces DHCP IP Address Allocation Statistics Warning Modifying the settings on this page can impact the ability of devices to access your wireless network. Wireless Interface Wireless Interface Enabled Disabled Default: Enabled Wi-Fi Protected Setup Status: idle Enabled Disabled Default: Disabled Enter WPS PIN Push WPS Button Remotely Network Network Name (SSID) Default: \ SSID Broadcast Enabled Disabled Default: Enabled Wireless Channel Auto 1 (2412 MHz) 2 (2417 MHz) 3 (2422 MHz) 4 (2427 MHz) 5 (2432 MHz) 6 (2437 MHz) 7 (2442 MHz) 8 (2447 MHz) 9 (2452 MHz) 10 (2457 MHz) 11 (2462 MHz) Default: Auto Current Wireless Channel 11 Check Wireless Channel Availability Security Wireless Security Enabled Disabled Default: Enabled Authentication Type WEP-Open WEP-Shared WPA-PSK (TKIP) WPA-PSK (TKIP) and WPA2-PSK (AES) WPA2-PSK (AES) Default: WPA-PSK (TKIP) and WPA2-PSK (AES) Wireless Key Use default Wireless Network Key printed on the System Label Use custom Wireless Network Key Serial Number System Password Wireless Network Key MAC Filtering MAC Filtering Edit Blocked/Allowed Device List Advanced Settings Power Setting 25 mW 50 mW 75 mW 100 mW 150 mW 200 mW 250 mW 300 mW 350 mW 400 mW Default: 400 mW Wireless Mode 802.11b/g 802.11b 802.11g Default: 802.11b/g DTIM Period Default: 1 Maximum Connection Rate Auto 1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 22 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Default: 54 Mbps
Home > Screenshots > 2Wire > 3600HGV > Wireless