WAN Configuration for the A-Link RR24APRouter Sceenshot

Back to the A-Link RR24AP



Screenshots from PortForward.com


ADSL Connection Mode WAN Configuration This page is used to configure the parameters for the channel operation modes of your ADSL Modem/Router. VPI:    VCI: Encapsulation: LLC   VC-Mux Channel Mode: 1483 Bridged 1483 MER PPPoE PPPoA 1483 Routed        Enable NAPT: Admin Status: Enable   Disable PPP Settings: User Name: Password: Type: Continuous Connect on Demand Manual Idle Time (min): WAN IP Settings: Type: Fixed IP DHCP Local IP Address: Remote IP Address: Subnet Mask: Unnumbered Default Route: Disable Enable   Current ATM VC Table: Select Inf Mode VPI VCI Encap NAPT IP Addr Remote IP Subnet Mask User Name DRoute Status Actions vc0 mer1483 0 100 LLC On On Enable vc1 mer1483 0 33 LLC On On Enable vc2 mer1483 8 35 LLC On On Enable
Home > Screenshots > A-Link > RR24AP > WAN Configuration