Help LAN Configuration Help for the A-Link RR24APIRouter Sceenshot
>Help>LAN Configuration Help --> Log Out --> LAN Configuration Help Configuring LAN Groups with static IP address must be done in a way that the range of assignable IP address on each of the LAN groups should not overlap with other lan groups. A rule of thumb would be that each lan group should be on its own network. For example, say you have 3 lan groups each being setup with static IP addressing. Below is a sample configuration data, LanGroup #1 IP Address 192.168.1.1 NetMask 255.255.255.0 LanGroup #2 IP Address 192.168.2.1 NetMask 255.255.255.0 LanGroup #3 IP Address 192.168.3.1 NetMask 255.255.255.0 The example shows that each lan group is on its own network and that there is no everlap in assignable IP address besed on netmask.