Tools System Commands for the A-Link RR24APIRouter Sceenshot
>Tools>System Commands --> System Commands --> Remote Log - Router --> User Management --> Update Gateway --> Ping Test --> Modem Test --> Log Out --> System Commands System Commands allow you to carry out basic system actions. Press the button to execute a command. Press this button in order to permanently save the current configuration of the Gateway. If you do restart the system without saving your configuration, the Gateway will revert back to the previously saved configuration. Use this button to restart the system. If you have not saved your configurations, the Gateway will revert back to the previously saved configuration upon restarting. NOTE: Connectivity to the unit will be lost. You can reconnect after the unit reboots. Use this button to restart the Wireless Access Point. It is important to Restart Access Point any time you change your Wireless settings. Use this button to restore factory default configuration. NOTE: Connectivity to the unit will be lost. You can reconnect after the unit reboots.