PPPoE Connection Setup for the ACorp Sprinter-LAN420MRouter Sceenshot

Back to the ACorp Sprinter-LAN420M

Screenshots from PortForward.com

>Setup>New Connection LAN Setup --> LAN Configuration --> DNS Configuration --> Ethernet Switch --> WAN Setup --> New Connection --> Modem --> Webstream   --> Log Out --> PPPoE Connection Setup Name: Options: NAT  Firewall        Type: PPPoE PPPoA Static DHCP Bridge CLIP Sharing: Disable Enable VLAN VLAN ID: Priority Bits: 0 1 2 3 4 5 6 7   PPP Settings Static IP:  Enable Night Mode:  Username:  ReUsername: Password:  RePassword: AC Name:  Night AC Name:  Service Name:  Night Service Name:  Idle Timeout:   secs Start Time Hour.: Min.: Keep Alive:   min End Time Hour.:   Min.: Authentication:  Auto CHAP PAP MTU:   bytes On Demand:  Default Gateway:  Enforce MTU:  Debug:  PPP Unnumbered:  LAN:  LAN group 1 Use Peer DNS:  Enable Save SID:  PVC Settings PVC:  New VPI: VCI: QoS:  UBR CBR VBR PCR:  cps SCR:  cps MBS:  cells CDVT:  usecs Auto PVC: Point at error markers to see error details
Home > Screenshots > ACorp > Sprinter-LAN420M > PPPoE Connection Setup