Remote GUI for the Actiontec GT784WNRouter Sceenshot

Back to the Actiontec GT784WN



Screenshots from PortForward.com


Advanced Setup - Remote Management - Remote GUI Home Status Quick Setup Wireless Setup Utilities Advanced Setup Firmware Version: GT784WN-VZ-1.1.22 GT784WNV Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings DSL Settings IP Addressing WAN IP Settings WAN Auto Detection LAN IP And DHCP Settings DHCP Reservation IGMP Snooping QoS Settings QoS Upstream Remote Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin Password Port Forwarding Applications DMZ Hosting Firewall NAT UPnP IPSEC TR-069 PortMapping Log --> Remote GUI If you want to access the GUI of your Broadband Gateway remotely, please turn Remote GUI On. In order to enable remote GUI an Admin Password must be set below. You can change the default remote GUI port below to allow for remote access. To access your Gateway remotely you will need to use http:// followed by the Gateway IP and access port. NOTE: The password must be at least 6 characters long and include at least one alpha numeric character. The password cannot begin with characters such as '?!@#$%^&*'. 1. Set the remote GUI state below.     Remote GUI : Enable Disable 2. Enter the admin password below.    Username: admin    Admin Password:    Re-Type Admin Password: 3. Set the remote management port.     Remote Management Port: 4. Set the remote management timeout.     Disable Remote Management After: Always On 15 Minutes   30 Minutes 60 Minutes 12 Hours 24 Hours 5. Click "Apply" to save changes. Copyright © 2011 Actiontec Inc. All Rights Reserved
Home > Screenshots > Actiontec > GT784WN > Remote GUI