Wireless WPS for the Actiontec GT784WNVRouter Sceenshot

Back to the Actiontec GT784WNV



Screenshots from PortForward.com


Wireless Setup - WPS Home Status Quick Setup Wireless Setup Utilities Advanced Setup Firmware Version: GT784WN-VZ-1.1.6 GT784WNV Wireless Settings Basic Settings Wireless Security Radio Setup Multiple SSID MAC Authentication WPS WMM 802.1x WPS (Wi-Fi Protected Setup) WPS provides an easy and secure way to establish a wireless network by sharing the wireless key between the Gateway and wireless client. Click the button to enable WPS in the Gateway. 1. Select the WPS type. WPS Type: Push Button (PBC) AP PIN End Device PIN 2. Click "Connect" to initiate a WPS connection in the Gateway. Click the button to disable WPS in the Gateway. 1. Select the WPS type. WPS Type: Push Button (PBC) AP PIN End Device PIN 2. Click "Connect" to initiate a WPS connection in the Gateway. 2. Insert the WPS AP PIN in the end device. 2. Select the WPS device MAC address. MAC Address: 00:3c:45:c4:cd:23 00:3c:45:c4:cd:12 --> 2. Insert the PIN from the end device. End Device PIN: 3. Click "Connect" to initiate a WPS PIN connection in the Gateway. 4. The device will show up in the WPS device connected. Name IP Address MAC Address WPS Type WPS State Edit Motorola Cell 192.168.0.67 00:3c:43:12:3a:32 PBC Connected N/A N/A 12:3c:43:cd:3a:32 AP PIN Associating N/A N/A 00:3c:45:c4:cd:23 END DEVICE PIN Waiting N/A N/A 00:3c:45:c4:cd:12 END DEVICE PIN Incorrect PIN -->   Copyright 2011 Actiontec Inc. All Rights Reserved
Home > Screenshots > Actiontec > GT784WNV > Wireless WPS