DHCP Settings for the Actiontec M1000 - QwestRouter Sceenshot
Advanced Setup - IP Addressing - DHCP Settings Qwest® Modem Configuration Actiontec M1000 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Mon,Oct 18, 11:08:08AM 2010 Blocking/Filtering Services Blocking Website Blocking Schedule Rules Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote Management / Telnet Telnet Timeout Setting Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT Connection Status: Qwest DSL: CONNECTED 1536 / 736 Kbps ISP Status: CONNECTED DHCP Settings Your DSL Modem will automatically assign an IP Address to each device in your network. If you are using an additional Router to assign these IP Addresses, you will need to turn this function Off. 1. Please select "On" or "Off" for this function. DHCP Server On Off 2. If you clicked "Off", please click "Apply" to save your changes. 3. If you selected “On”, please confirm the default settings below. If the settings are correct, go to Step 5 and click “Apply” to save your changes. 4. If you would like to change these settings, check the box below, then enter your information. I would like to adjust the DHCP Server settings. Once you have adjusted your settings below, please click Apply to save your changes. Beginning IP Address: Ending IP Address: Subnet Mask: DNS: Dynamic Static DNS Server 1: DNS Server 2: 5. Click "Apply" to save your changes. Copyright © 2007 Qwest Communications, Inc.