Basic Security Settings for the Actiontec M1424-WR Rev FRouter Sceenshot

Back to the Actiontec M1424-WR Rev F

Screenshots from

Frontier           Main Wireless Settings My Network Firewall Settings Parental Control Advanced System Monitoring   Main   Wireless Status   Basic Security Settings   Advanced Security Settings   Logout Basic Security Settings Instructions for setting up a wireless network using basic WEP wireless security are set out below. However, we recommend that you establish stronger security using the Advanced Security Settings. To establish stronger security, select OFF in Step 4, click on APPLY and then go to Advanced Security Settings to setup security. 1.Turn Wireless ON   Wireless: On Off     2.Change the SSID setting to any name or code you want   (SSID is the same thing as the name of your Wireless Network.) SSID:         3.Channel   To change the channel of the frequency band at which the Router communicates, please enter it below. Then click apply to save your settings: NOTE: In the United States, use channels 1-11.     Channel:         Automatic 1 2 3 4 5 6 7 8 9 10 11    Keep my channel selection during power cycle. 4.Click on the button next to WEP   WEP prevents unintentional connections to your wireless home network. For greater protection against hacking and security breaches, see Advanced Security Settings. WEP Off         5.Select a WEP Key   NOTE: - To create a 64/40 WEP Hex Key, you need to enter a combination of 10 digits. You can choose any letter from A-F or any number from 0-9. Sample HEX WEP Key: 0FB310FF28. - To create a 64/40 WEP ASCII, you need to enter a combination of 5 ASCII characters. Sample ASCII WEP Key: hello. Select a WEP Key:         64/40 bit 128/104 bit Hex ASCII   Key Code:                 0 Digits left 6. Write down wireless settings.   In order for every computer to connect to this Router wirelessly, you need to make sure that the wireless setup for each computer uses the SAME settings listed below. Please make sure that you write down all of the values set on this screen. Current Wireless Status: Wireless: ON SSID: 64-BIT WEP: ON 64-BIT WEP KEY: Channel: Automatic SSID Broadcast: Disabled MAC Authentication: Disabled Wireless Mode: Compatibility Mode(802.11b/g/n) Packets Sent: 481480 Packets Received: 230143 Apply  
Home > Screenshots > Actiontec > M1424-WR Rev F > Basic Security Settings