Basic Security Settings for the Actiontec MI424-WR Rev CRouter Sceenshot

Back to the Actiontec MI424-WR Rev C

Screenshots from

Actiontec M1424-WR Rev C Verizon Main Wireless Settings My Network Firewall Settings Parental Control Advanced System Monitoring Main Wireless Status Basic Security Settings Advanced Security Settings Logout Basic Security Settings Instructions for setting up a wireless network using basic WEP wireless security are set out below. However, we recommend that you establish stronger security using Advanced Security Settings. To establish stronger security, select "OFF" in Step 4, click on APPLY and then go to Advanced Security Settings to setup security. 1. Turn Wireless On Wireless On Off 2. Change the SSID setting to any name or code you want (SSID is the same thing as the name of your Wireless Network.) 3. Channel To change the channel of the frequency band ath which the Router communicates, please enter it below. Then click apply to save your settings: NOTE: Channels 1, 6 and 11 are standard channels. Selecting any other channel may degrade preformance. Channel: Automatic Keep my channel selection during power cycle 4. Click on the button next to WEP WEP prevents unintentional connections to your wireless home network. For greater protection against hacking and security breaches, see Advanced Security Settings. 5. Select a WEP Key NOTE: - To create a 64/40 WEP Hex Key, you need to enter a combination of 10 digits. You can choose any letter from A-F or any number from 0-9. Sample HEX WEP Key: 0FB310FF28. - To create a 64/40 WEP ASCII, you need to enter a combination of 5 ASCII characters. Sample ASCII WEP Key: hello. Select a WEP Key: 64/40 Hex Key Code: 0 Digits left
Home > Screenshots > Actiontec > MI424-WR Rev C > Basic Security Settings