Port Forwarding for the Actiontec Q1000 - QwestRouter Sceenshot

Back to the Actiontec Q1000 - Qwest



Screenshots from PortForward.com


Advanced Setup - Security - Port Forwarding Qwest Modem Configuration Actiontec M1000 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, December 13, 2010 - 06:35 AM Blocking/Filtering Services Blocking Website Blocking Scheduling Access Broadband Settings IP Addressing DHCP Settings LAN IP Address WAN IP Address IGMP Snooping QoS IP QoS Settings Upstream IP QoS Settings Downstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin Password Port Forwarding Applications DMZ Hosting Firewall NAT UPnP IPSEC Connection Status: Qwest Broadband: CONNECTED 1535/893 Kbps ISP Status: CONNECTED Port Forwarding Enter ports or port ranges required to forward Internet applications to a LAN device below. 1. Set the LAN port and IP information.   Starting Port:   Ending Port:   Protocol: TCP UDP GRE   LAN IP Address:   2. Set the remote port and IP information. (Optional)   Starting Port:   Ending Port:   Set Remote IP Address: (0.0.0.0 will use any IP Address)   3. Click "Apply" to save your settings. Applied Port Forwarding Rules START/ END PORT PROTOCOL LAN IP ADDRESS START/ END PORT REMOTE REMOTE IP ADDRESS EDIT   Copyright 2009 Qwest, All Rights Reserved
Home > Screenshots > Actiontec > Q1000 - Qwest > Port Forwarding