Wireless 802.11b g n Mode for the Actiontec Q1000 - QwestRouter Sceenshot

Back to the Actiontec Q1000 - Qwest



Screenshots from PortForward.com


Wireless Setup - 802.11b/g/n Qwest Modem Configuration Actiontec M1000 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, December 13, 2010 - 06:33 AM Basic Settings Multiple SSID WEP WEP + 802.1x WPA or WPA2 WMM WPS SSID Broadcast MAC Authentication 802.11b/g/n Mode Channel Connection Status: Qwest Broadband: CONNECTED 1535/893 Kbps ISP Status: CONNECTED 802.11b/g/n Mode Your modem supports high-speed wireless devices using the 802.11b/g/n protocol. Enable and tune 802.11b/g/n parameters as appropriate. 1. Select Compatibility Mode. Compatibility Mode: Compatible Mode (802.11b, 802.11g, and 802.11n) Balanced Mode (802.11n+g only) Performance Mode (802.11n only) Legacy Mode (802.11b+g only) 802.11g only 802.11b only   2. Select maximum number of spatial streams. Maximum Spatial Streams: Auto 2 1   3. Select Channel Width. Channel Width: 20 MHz 40 MHz   4. Select Control Channel. Control Channel: None (20 MHz channel width only) Lower Upper   5. Select MSDU Aggregation. MSDU Aggregation: MSDU Aggregation Enabled MSDU Aggregation Disabled   6. Select MPDU Aggregation. MSDU Aggregation: MPDU Aggregation Enabled MPDU Aggregation Disabled   7. Select MIMO Power Save. MIMO Power Save: MIMO power save enabled MIMO power save disabled   8. Click "Apply" to save your changes. Copyright 2009 Qwest, All Rights Reserved
Home > Screenshots > Actiontec > Q1000 - Qwest > Wireless 802.11b g n Mode