Wireless WPA or WPA2 for the Actiontec Q1000 - QwestRouter Sceenshot

Back to the Actiontec Q1000 - Qwest



Screenshots from PortForward.com


Wireless Setup - WPA or WPA 2 Qwest Modem Configuration Actiontec M1000 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Monday, December 13, 2010 - 06:33 AM Basic Settings Multiple SSID WEP WEP + 802.1x WPA or WPA2 WMM WPS SSID Broadcast MAC Authentication 802.11b/g/n Mode Channel Connection Status: Qwest Broadband: CONNECTED 1535/893 Kbps ISP Status: CONNECTED WPA or WPA2 Protect your network with WPA. For more advanced enterprise network security use 802.1x. 1. Select SSID.     SSID :                   SSID 1 SSID 2 SSID 3 2. Set the WPA state.     WPA:   Enable  Disable 3. Select WPA type.     WPA or WPA2:         WPA or WPA2 - Personal WPA-Personal WPA2-Personal 4. Select encryption type.     Encryption Type: Both AES TKIP   5. Select a security key type or select Enterprise Network to use     802.1x.   Use Default Key/Passphrase         Key/Passphrase:   Use Custom Key/Passphrase         Key/Passphrase:   NOTE: To create a Pre-Shared Key, enter at least eight (8) alphanumeric characters in the text box above.   Enterprise Network         Group Key Interval: 802.1x           Server IP Address:         Port:         Secret:   6. Click "Apply" to save your changes. Copyright 2009 Qwest, All Rights Reserved
Home > Screenshots > Actiontec > Q1000 - Qwest > Wireless WPA or WPA2