Wireless Basic Settings for the Actiontec T1200HRouter Sceenshot

Back to the Actiontec T1200H



Screenshots from PortForward.com


Wireless Setup - Basic Settings Wireless Settings Basic Settings Advanced Settings WPS MAC Address Control WDS Basic Settings Basic Settings is used to enable or disable the wireless radio or change wireless security settings.     Wireless Radio Enable    Disable Select SSID SSID 1 SSID 2 SSID State Enable    Disable SSID Guest Enable    Disable SSID Broadcast Enable    Disable SSID Name Security WEP WEP + 802.1X --> WPA / WPA2 OFF WPA Type WPA or WPA2 - Personal WPA-Personal WPA2-Personal Encryption Type Both AES TKIP Security Key Type Use Default Key/Passphrase tetwetssdsd Use Custom Key/Passphrase        Enterprise Network Authentication Type Open Shared Security Key Type Use Default Key/Passphrase asfasdfdsf Use Custom Key/Passphrase   Key 1: 64 Bits 128 Bits             0 Digits left   Key 2: 64 Bits 128 Bits             0 Digits left   Key 3: 64 Bits 128 Bits             0 Digits left   Key 4: 64 Bits 128 Bits             0 Digits left Radius IP Address: Radius Port Radius Key Group Key Interval
Home > Screenshots > Actiontec > T1200H > Wireless Basic Settings