Wireless Advanced Settings for the Actiontec V1000H - TelusRouter Sceenshot

Back to the Actiontec V1000H - Telus



Screenshots from PortForward.com


Wireless Setup - Advanced Settings Wireless Settings Basic Settings Advanced Settings WPS MAC address control Advanced Settings Your modem supports high-speed wireless devices using the 802.11b/g/n protocol. Enable and tune 802.11b/g/n parameters as appropriate. Compatibility Mode Compatible Mode (802.11b, 802.11g, and 802.11n) Balanced Mode (802.11n+g only) Performance Mode (802.11n only) Legacy Mode (802.11b+g only) 802.11g only 802.11b only Maximum Spatial Streams Auto 2 1 Channel Width 20 MHz 40 MHz Control Channel None (20 MHz channel width only) Lower Upper MSDU Aggregation MSDU Aggregation Enabled MSDU Aggregation Disabled MPDU Aggregation MPDU Aggregation Enabled MPDU Aggregation Disabled WMM Enable     Disable WMM Power Save Enable     Disable Channel Auto Detect 1 2 3 4 5 6 7 8 9 10 11 Wireless Power Level 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% WPS Enable     Disable    Connecting a device with WPS AP PIN WPS AP PIN Current WPS AP PIN: 64513737 Click "Generate PIN" button to generate a new AP PIN: Click "Restore Default PIN" button below to restore default AP PIN:        Connecting a device with WPS PBC or End Device PIN Push Button Configuration (PBC)   End Device PIN:          Insert End Device PIN:   The "Connect" button must be pressed within 120 seconds on client WPS device.  
Home > Screenshots > Actiontec > V1000H - Telus > Wireless Advanced Settings