Wireless Advanced Settings for the AirLAN WR150Router Sceenshot

Back to the AirLAN WR150



Screenshots from PortForward.com


WR150 (build 6023) - Advanced Wireless Settings WISPR Control Panel Setup Wireless Basic Settings Wireless Security MAC Filter Advanced Settings Services Security NAT Administration Status Advanced Wireless Settings Advanced Settings Authentication Type Auto  Shared Key (Default: Auto) CTS Protection Mode Auto  Disable (Default: Auto) Frame Burst Enable  Disable Pkt Aggregate Enable  Disable Beacon Interval   (Default: 100ms, Range: 10 - 65535) DTIM Interval   (Default: 1 , Range: 1 - 255) Fragmentation Threshold   (Default: 2346, Range: 256 - 2346) RTS Threshold   (Default: 2347, Range: 0 - 2347) Preamble Long Short Auto (Default: Short) Shortslot Override Long Short Auto (Default: Short) TX Power (Default: 35%, Range: 1 - 100%)   --> Help Authentication Type: You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication. : --> More... For detailed help please click HERE Firmware: WISPR 2.43 (Oct 20 2011 - SVN: 6023) Time: 23:18:07 up 1 day, 6:17, load average: 0.11, 0.02, 0.00 WAN  IP: \
Home > Screenshots > AirLAN > WR150 > Wireless Advanced Settings