Basic Wireless Settings for the Amped Wireless R10000Router Sceenshot

Back to the Amped Wireless R10000



Screenshots from PortForward.com


Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Basic Wireless Settings  Manually configure the settings for your home wireless network Basic Settings Disable All Wireless Connections: Country: Band: 2.4 GHz (B) 2.4 GHz (G) 2.4 GHz (N) 2.4 GHz (B+G) 2.4 GHz (G+N) 2.4 GHz (B+G+N) Mode: AP Client WDS AP+WDS Network Type: Infrastructure Ad hoc Broadcast SSID: Enable   Disable Date Rate: Auto 1M 2M 5.5M 11M 6M 9M 12M 18M 24M 36M 48M 54M MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 Wireless Network ID (SSID): Channel Width: 20MHz 40MHz Control Sideband: Upper Lower Channel Number: Auto 1 2 3 4 5 6 7 8 9 10 11 WMM: Disabled Enabled Associated Clients:       Helpful Tips: These settings apply to your local wireless network. Disabling all Wireless: Turn off all WiFi activity. Broadcast SSID: Disabling SSID broadcasting of your SSID will make it so outside users cannot see your network when they scan for wireless networks. Users must manually enter the SSID to connect Wireless Network ID (SSID): The name of your wireless network. Guest Networks: Add additional wireless network names with different wireless settings. Each new SSID can have its own security setting and speed settings. Channel Number: WiFi networks operate on specific wireless channels. Some network channels may have more interference than others. If your performance is unstable, try a different channel number. If you are using a repeater with this network, it is recommended you set a static channel, instead of using "Auto" WMM: Prioritizes multimedia data over the wireless network. Associated Clients: Shows active users connected wirelessly to your network. For more detailed information, please view the Users Manual on the included CD.   2011 Amped Wireless /Newo Corporation. All rights reserved.
Home > Screenshots > Amped Wireless > R10000 > Basic Wireless Settings