Internet Network for the Amped Wireless R10000Router Sceenshot

Back to the Amped Wireless R10000



Screenshots from PortForward.com


Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Internet IP Settings (WAN) Adjust the IP Settings for your Internet connection. Internet Connection Type: Manual IP (Static) Automatic/Dynamic IP (DHCP) PPPoE Login Required PPTP Login Required L2TP Login Required IP Address: Subnet Mask: Default Gateway: MTU Size:  (1400-1500 bytes) Host Name: MTU Size:  (1400-1492 bytes) User Name: Password: Service Name: Connection Type: Continuous Connect on Demand Manual Idle Time:  (1-1000 minutes) MTU Size:  (1360-1492 bytes) IP Address: Subnet Mask: Server IP Address: User Name: Password: Connection Type: Continuous Connect on Demand Manual Idle Time:  (1-1000 minutes) MTU Size:  (1400-1460 bytes) Request MPPE Encryption Request MPPC Compression IP Address: Subnet Mask: Server IP Address: User Name: Password: Connection Type: Continuous Connect on Demand Manual Idle Time:  (1-1000 minutes) MTU Size:  (1400-1460 bytes) User Name: Password: PIN: APN: Dial Number: Connection Type: Continuous Connect on Demand Manual       Idle Time:  (1-1000 minutes) MTU Size:  (1420-1490 bytes) Obtain DNS Automatically Set DNS Manually DNS 1: DNS 2: DNS 3:   Optional (If required by your Internet provider): Clone MAC Address:       Helpful Tips: Quick Definitions: Manual IP: For Internet connections where the Internet provider does not provide you with an IP address automatically.  If you know the IP address and DNS settings that your Internet provider uses, select this option. Automatic/Dynamic IP: This is the configuration type most often used by Internet providers.  Automatic configurations are used by both DSL, Cable as well as other providers.  Under the Automatic IP method, the Internet provider will assign your router an Internet IP address automatically.     PPPoE: PPPoE DSL connections normally require login information.  If you do not know the settings for your PPPoE connection please contact your Internet provider. PPTP and L2TP connections require login information as well as IP address settings.  If you do not know the settings for your PPTP / L2TP connection please contact your Internet provider.   2011 Amped Wireless /Newo Corporation. All rights reserved.
Home > Screenshots > Amped Wireless > R10000 > Internet Network