Port Forwarding for the Amped Wireless R10000Router Sceenshot
Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Port Forwarding Port Forwarding allows you to automatically redirect common network services to a specific network device or computer on your local network. These settings are useful for hosting web servers, mail servers, network cameras and other specific network server devices behind your network firewall. Enable Port Forwarding IP Address: Protocol: Both TCP UDP Port Range: - Comment: Current Port Forwarding Table Local IP Address Protocol Port Range Comment Select 192.168.3.105 TCP+UDP 80 NAS 192.168.3.105 TCP+UDP 443 NAS 192.168.3.105 TCP+UDP 21 Helpful Tips: Port Forwarding is a rule that tells the router that if a specific type of request comes in on a specific port, then that request should be forwarded to a specific device on the private network. Port Forwarding is often used for setting up servers, cameras and other devices that require remote access. To open a single port, simply enter the same number in both fields for the Port Range © 2011 Amped Wireless /Newo Corporation. All rights reserved.