System Status for the Amped Wireless R10000Router Sceenshot

Back to the Amped Wireless R10000



Screenshots from PortForward.com


Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password System Status System Information Uptime: 13day:18h:23m:45s Firmware Version: v2.5.2 Build Time: Thu Oct 13 09:39:06 CST 2011 Current Date / Time: 2/ 9/2012 9:22:34 Internet Connection Status Internet Connection Type: PPPoE Connected IP Address: \ Subnet Mask: 255.255.255.255 Default Gateway: \ MAC Address: \    --> Wireless Settings Band: 2.4 GHz (B+G+N) SSID: \ Channel Number: 11 Encryption: WPA2 Mixed BSSID: \ Associated Clients: 2 Local Area Network Settings Attain IP Protocol: Fixed IP --> Router IP Address: 192.168.3.1 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.3.1 DHCP Server: Enabled MAC Address: \     Helpful Tips: The System Status provides you with a snapshot of your router's current connections and settings.  System Information: Provides information on the version and build time of your firmware.  This is used to help our support department determine what firmware version your device is running.  The Current Date / Time is the setting for the system clock.  If this time is off, go to the System Clock section and configure your system time. Internet Connection Status: Displays information from your Internet Provider.  If your Internet connection stops working, you may try to “Release the IP Settings” and then “Renew the IP Settings” to attempt to obtain new settings from your Internet Provider.  If this fails to fix your Internet connection, you may want to try running through the Smart Setup Wizard again or contact our support department at 888-573-8820. Wireless Settings: Displays the details of the wireless network.  Local Area Network Settings: Display the current configurations for local network IP address and DHCP server settings.   © 2011 Amped Wireless /Newo Corporation. All rights reserved.
Home > Screenshots > Amped Wireless > R10000 > System Status