Upgrade Firmware for the Amped Wireless R10000Router Sceenshot
Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Upgrade Firmware The High Power Router uses software (firmware) to operate. In the event that a new firmware file is available you may update it here. During the upgrade process DO NOT power off the device to avoid damage to the High Power Router. Check the Support Webpage to see if there are any updates available for this product. Current Firmware Version: v2.5.2 Build Time: Thu Oct 13 09:39:06 CST 2011 Select File: Helpful Tips: Firmware updates are downloaded as a zip file from the Support Webpage link on the left. You will need to have an unzipping program to open the file. Inside the file will be a text document with details on the current firmware release and instructions on how to upgrade the firmware. The firmware file will be a file with a “.bin” extension. Save the firmware file on your computer’s desktop and select “Choose File” from the link on the right to locate your firmware file. Be sure to only use “.bin” files when upgrading the firmware. Click Upload when you have selected the file. The upgrading process should take a few minutes. Do not disconnect any cables from the router at this time. © 2011 Amped Wireless /Newo Corporation. All rights reserved.