Wireless Security Settings for the Amped Wireless R10000Router Sceenshot

Back to the Amped Wireless R10000



Screenshots from PortForward.com


Amped Wireless High Power Wireless-N 600mW Smart Router R10000 Smart Setup Wizard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary More Settings Wireless Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Wireless Coverage Controls Access Schedule Block Websites User Access (MAC) User Access (IP) Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Security Settings Configure the Security Settings for your wireless network. Select Wireless Network:   Main - Raywd-S1          PSK Pre-Shared Key TKIP AES TKIP AES PSK Pre-Shared Key Helpful Tips: Change the security settings for your wireless network. Using the drop down menu, you can select which network you wish to configure and adjust the security settings as they appear below. If you are using the Guest Network feature, you will be able to adjust the security settings for your additional SSID's here. Encryption: Select the encryption type for your network. It you are not sure which encryption type to use, we recommend you choose WPA/WPA2 Mixed Mode. WEP is rated as a low level encryption and is compatible with all wireless devices and operating systems.. Using WEP may slow down your wireless performance. WPA is a medium level encryption and is supported by most wireless devices and operating systems. WPA2 is a high level encryption and is supported by most wireless devices and operating systems. WPA Mixed Mode allows the use of both WPA and WPA2 at the same time. 2011 Amped Wireless /Newo Corporation. All rights reserved.
Home > Screenshots > Amped Wireless > R10000 > Wireless Security Settings