Dashboard for the Amped Wireless TAP-R2Router Sceenshot
Amped Wireless New Firmware update available now. Click here. Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary --> More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: The Dashboard provides you with information regarding your current Internet connection and basic Router settings. Internet Connection The Router may require additional configuration to connect successfully to your broadband modem. If additional settings are required the Device Status section will inform you that you are not connected to the Internet. The Dashboard also provides a graphical status of the Router’s current connection state to your broadband modem. The Internet IP, Subnet Mask and DNS information are all connection details relating to the connection between the Router and your broadband modem. If there is a problem with your Internet connection, click Basic Settings to configure the Router with your modem. Local Network The Local Network settings (IP, Subnet Mask and DNS) relate to the Router’s local network. This is the wired or wireless network that your home or office computers, smartphones and other network devices connect to. Wi-Fi Status The Wi-Fi Status provides you with the SSID and Security Key for both the 2.4 and 5GHz Wi-Fi networks. This is the login data needed to access the Router’s Wi-Fi network. More Settings To adjust additional settings, such as security features, schedules, login passwords and more, click on More Settings. Welcome to the Dashboard Wi-Fi Status 2.4GHz SSID: 5GHz SSID: Security Key: Security Key: Guest Networks Connected Devices 2.4GHz SSID: TAP-R2 2.4_Guest_1 Connected Users: 13 View Security Key: USB Storage Port: 5GHz SSID: TAP-R2 5.0_Guest_1 Parental Controls Security Key: Website Blocking: ( Edit ) Device Status Internet Connection: Local Network IP: 192.168.3.1 Internet (WAN) IP: Firmware Date: Fri Apr 24 12:34:44 CST 2015 Click here if you wish to access the Router Setup Wizard again. © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time. Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi: -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection. When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.