Internet Network for the Amped Wireless TAP-R2Router Sceenshot
Amped Wireless Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary --> More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: Quick Definitions: Manual IP: For Internet connections where the Internet provider does not provide you with an IP address automatically. If you know the IP address and DNS settings that your Internet provider uses, select this option. Automatic/Dynamic IP: This is the configuration type most often used by Internet providers. Automatic configurations are used by DSL, Cable, and other providers. Under the Automatic IP method, the Internet provider will assign your router an Internet IP address automatically. PPPoE: PPPoE DSL connections normally require login information. If you do not know the settings for your PPPoE connection, please contact your Internet provider. PPTP and L2TP connections require login information as well as IP address settings. If you do not know the settings for your PPTP / L2TP connection please contact your Internet provider. Internet IP Settings (WAN) Adjust the IP Settings for your Internet connection. Internet Protocol Version: IPv4 IPv6 Internet Connection Type: Manual IP (Static) Automatic/Dynamic IP (DHCP) PPPoE – Login Required PPTP – Login Required L2TP – Login Required USB3G
--> IP Address: Subnet Mask: Default Gateway: MTU Size: (1400-1500 bytes) Host Name: MTU Size: (1400-1500 bytes) User Name: Password: Service Name: Connection Type: Idle Time: (1-1000 minutes) MTU Size: (1360-1492 bytes) IP Address: Subnet Mask: Server IP Address: User Name: Password: Connection Type: Idle Time: (1-1000 minutes) MTU Size: (1400-1460 bytes) Request MPPE Encryption Request MPPC Compression IP Address: Subnet Mask: Server IP Address: User Name: Password: Connection Type: Idle Time: (1-1000 minutes) MTU Size: (1400-1460 bytes) User Name: Password: PIN: APN: Dial Number: Connection Type: Idle Time: (1-1000 minutes) MTU Size: (1420-1490 bytes) Obtain DNS Automatically Set DNS Manually DNS 1: DNS 2: DNS 3: Optional (If required by your Internet provider): Clone MAC Address: © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time. Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi: -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection. When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.