System Status for the Amped Wireless TAP-R2Router Sceenshot

Back to the Amped Wireless TAP-R2



Screenshots from PortForward.com


Amped Wireless Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary --> More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: The System Status provides you with a snapshot of your router's current connections and settings. System Information: Provides information on the version and build time of your firmware. This is used to help our support department determine what firmware version your device is running. The Current Date / Time is the setting for the system clock. If this time is off, go to the System Clock section and configure your system time. Internet Connection Status: Displays information from your Internet Provider. If your Internet connection stops working, you may try to “Release the IP Settings” and then “Renew the IP Settings” to attempt to obtain new settings from your Internet Provider. If this fails to fix your Internet connection, you may want to try running through the Smart Setup Wizard again or contact Elite Support Center at 888-573-8820. Wi-Fi Settings: Displays the details of the 2.4GHz and 5GHz Wi-Fi network. Local Area Network Settings: Display the current configurations for local network IP address and DHCP server settings. System Status System Information Uptime: 0day:10h:8m:29s Firmware Version: TAP-R2_v1.2 Build Time: Fri Apr 24 12:34:44 CST 2015 Current Date / Time: 10/24/2015 6:31:35 Internet Connection Status Internet Connection Type: Connected IP Address: Subnet Mask: 255.255.240.0 Default Gateway: DNS Server: MAC Address:    --> 5GHz Wi-Fi Network Settings Band: SSID: Channel Number: 36 Encryption: WPA2 Mixed BSSID: Associated Clients: 1 2.4GHz Wi-Fi Network Settings Band: SSID: Channel Number: 10 Encryption: WPA2 BSSID: Associated Clients: 8 Local Area Network Settings Attain IP Protocol: Fixed IP --> Router IP Address: 192.168.3.1 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.3.1 DHCP Server: MAC Address:     © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time.  Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi:     -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection.     When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.
Home > Screenshots > Amped Wireless > TAP-R2 > System Status