Wi Fi 2.4GHz Coverage Controls for the Amped Wireless TAP-R2Router Sceenshot

Back to the Amped Wireless TAP-R2

Screenshots from PortForward.com

Amped Wireless Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary -- > More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: The Amped Wireless Router provides wireless coverage over greater distances. In some cases this coverage is more than what is needed. 2.4GHz Wireless Coverage Controls helps you limit the coverage of your 2.4GHz Wi-Fi network. By adjusting the 2.4GHz wireless output power lower, the overall distance of your 2.4GHz Wi-Fi network decreases as well.   Note: This page does not adjust settings for your 2.4GHz wireless network. Your 2.4GHz Wi-Fi network coverage can be adjusted from the 2.4GHz Wi-Fi Settings menu. If you are concerned about the overall speed of your wireless network, it is recommended that you keep the Wireless Output Power at 100% (even in a smaller location). You may enable Wi-Fi security on your network to prevent access by unwanted users. Wireless Coverage Controls (2.4GHz) Adjust the output power and range of your 2.4GHz Wi-Fi network. For a smaller coverage area, choose a lower output power percentage. For a larger coverage area, select a higher output power percentage. Wireless Output Power:           © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time.  Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi:     -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection.     When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.
Home > Screenshots > Amped Wireless > TAP-R2 > Wi Fi 2.4GHz Coverage Controls