Wi Fi 2.4GHz Security for the Amped Wireless TAP-R2Router Sceenshot

Back to the Amped Wireless TAP-R2



Screenshots from PortForward.com


Amped Wireless Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary --> More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: Change the security settings for your 2.4GHz Wi-Fi network. Using the drop down menu, you can select which 2.4GHz network you wish to configure and adjust the security settings as they appear below. If you are using the Guest Network feature, you will be able to adjust the security settings for your additional 2.4GHz SSIDs here. Encryption: Select the encryption type for your network. If you are not sure which encryption type to use, we recommend you choose WPA/WPA2 Mixed Mode. WEP is rated as a low level encryption and is compatible with all Wi-Fi devices and operating systems. Using WEP may slow down your Wi-Fi performance. WPA is a medium level encryption and is supported by most Wi-Fi devices and operating systems. WPA2 is a high level encryption and is supported by most Wi-Fi devices and operating systems. WPA Mixed Mode allows the use of both WPA and WPA2 at the same time. Security Settings (2.4GHz) Configure the Security Settings for your 2.4GHz Wi-Fi network. Select a Wi-Fi Network:            PSK Pre-Shared Key TKIP AES TKIP AES PSK Pre-Shared Key © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time.  Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi:     -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection.     When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.
Home > Screenshots > Amped Wireless > TAP-R2 > Wi Fi 2.4GHz Security