Wi Fi 2.4GHz WPS for the Amped Wireless TAP-R2Router Sceenshot

Back to the Amped Wireless TAP-R2



Screenshots from PortForward.com


Amped Wireless Dashboard 1) Internet Connection 2) System Clock 3) Wireless Settings 4) Setup Summary --> More Settings 5GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule 2.4GHz Wi-Fi Settings Basic Settings Security Settings Advanced Settings Wi-Fi Protected Setup Wireless Coverage Access Schedule Network Settings Local Network (LAN) Internet Network (WAN) Advanced Settings Smart Features Block Websites User Access (MAC) User Access (IP) USB Storage Local Sharing FTP Server Firewall Settings Port Filtering Port Forwarding DMZ Virtual LAN Denial of Service Quality of Service Routing Setup Management System Status Network Statistics Dynamic DNS System Clock System Logs Upgrade Firmware Save/Reload Settings Password Helpful Tips: WiFi Protected Setup is an alternative method for easy and secure configuration of your Wi-Fi network. WiFi Protected Setup allows you to easily add additional WiFi devices to your Wi-Fi network without having to configure WiFi encryption as it is automatically configured through WPS. To use WPS, your Wi-Fi device must support WPS. Most new wireless devices will have a physical WPS button on the device. If it does not, then it may have a "soft button" meaning that the PBC (Push Button Configuration) button is on the software itself. If your Wi-Fi device does not have a PBC button, then it may use the wireless PIN method for connecting to your network. WPS is an optional connection method. If you are familiar with connecting to your Wi-Fi network with encryption keys, you do not need to use WPS. Wi-Fi Protected Setup - WPS (2.4GHz) WPS enables one touch configuration for your 2.4GHz Wi-Fi users connecting to the Router. For devices that have WPS with push button configuration capabilities, choose one of the options below to configure your network using WPS. Disable Wi-Fi Protected Setup - WPS (2.4GHz)   Enable Wi-Fi Protected Setup Option A: If your wireless user has a Wi-Fi Protected Setup button, click or press the WPS PBC (Push Button Configuration) button here:     Option B: If your wireless device requires a WPS PIN number to join the wireless network, use this PIN:     Option C: If your wireless user has a Wi-Fi Protected Setup PIN number, enter that number here: and then click       © 2014 Amped Wireless /Newo Corporation. All rights reserved. Applying Changes The router is applying your settings and may reboot during this process. This may take a few minutes, please do not make changes at this time.  Could not re-establish a connection to your Router. If you were connected wirelessly to the router please reconnect your computer/tablet to the following network: 2.4GHz WiFi:     -or- --> 5GHz WiFi: 2.4G Security: 5G Security: If you were connected using a cable, please check the cable connection.     When reconnected, press OK: If clicking OK does not work after you have reconnected to the router, try refreshing the web browser. If you still do not have access, turn the router off and back on, then try again.
Home > Screenshots > Amped Wireless > TAP-R2 > Wi Fi 2.4GHz WPS