IP Passthrough for the Arris BGW210-700 - ATTRouter Sceenshot

Back to the Arris BGW210-700 - ATT



Screenshots from PortForward.com


IP Passthrough Skip to Main Content Device Broadband Home Network Voice Firewall Diagnostics Status Packet Filter NAT/Gaming Public Subnet Hosts IP Passthrough Firewall Advanced IP Passthrough Making a change to some pulldowns on this page will automatically change the context below it, enabling you to fill only the appropriate fields for the change you have made. You have disabled JavaScript(TM) in your browser. When you change an item that has an Update button to the right of it, make your change, then click the Update button. This will transform the page according to the change you have made and you may then proceed. Allocation Mode Off Default Server Passthrough     Default Server Internal Address e.g. 192.0.2.1   Passthrough Mode DHCPS-dynamic DHCPS-fixed Manual     Passthrough Fixed MAC Address e.g. 00:01:02:03:04:05   Passthrough DHCP Lease Days: Hours: Minutes: Seconds  :  :  : e.g. 00:00:10:00 Help Allocation Mode: Off: The default server and IP Passthrough features are both disabled. Default Server: Allows the device to forward all externally initiated IP traffic (TCP and UDP protocols only) to a default host on the LAN. You might need this if you cannot anticipate what port number or packet protocol an in-bound application might use. For example, some network games select arbitrary port numbers when a connection is opened. Or you might want all unsolicited traffic to go to a specific LAN host. Passthrough: Allows the device's public IP address to be assigned to a single LAN client. There may be situations where Passthrough is not allowed. Default Server Internal Address: The IP Address of the device to receive the unexpected or unknown traffic. Format must be nnn.nnn.nnn.nnn. Passthrough Mode: The method in which the WAN IP address will be assigned to the selected LAN client. DHCPS-dynamic: The WAN IP address will be handed out by the device's DHCP server to the first LAN client that requests a DHCP lease. It may be helpful, after the device has obtained a WAN IP address, to cycle the desired LAN client's interface or reboot it. On disabling this feature, you should reboot the LAN client. DHCPS-fixed: The WAN IP address will be handed out by the device's DHCP server to the LAN client whose MAC address has been specified. It may be helpful, after the device has obtained a WAN IP address, to cycle the LAN client's interface or reboot it. On disabling this feature, you should reboot the LAN client. Manual: A LAN client must be manually configured with the device's assigned WAN IP address and gateway information. Passthrough Fixed MAC Address: When Passthrough Mode is DHCPS-fixed, this is the MAC of the selected LAN client. The Manual Entry must be in xx:xx:xx:xx:xx:xx (hexadecimal) format. Passthrough DHCP Lease: When Passthrough Mode is DHCPS, this is the duration of the lease that will be handed out by the device to the LAN client. © 2016 AT&T Intellectual Property. All rights reserved. AT&T and Globe logo are registered trademarks of AT&T Intellectual Property. Site Map © 2016 ARRIS Enterprises LLC. All rights reserved. ARRIS is a registered trademark of ARRIS Enterprises LLC.
Home > Screenshots > Arris > BGW210-700 - ATT > IP Passthrough