ALG Passthrough for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier



Screenshots from PortForward.com


ALG Passthrough NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Firewall Summary Level Packet Filtering Port Forwarding Port Triggering DMZ UPnP Blocking DoS ALG Passthrough Firewall - ALG Passthrough FTP: Enable Disable H.323: Enable Disable TFTP: Enable Disable PPTP: Enable Disable IPSec: Enable Disable SIP: Enable Disable Hide Help FTP: This feature provides the File Transfer Protocol. H.323: This feature provides audio-visual communications support. TFTP: Trivial File Transfer Protocol allows get/put a file from/to a remote host. PPTP: Point-to-Point Tunneling supports virtual private networking. IPSec (ESP): This feature helps ESP (IPsec encryption) work properly when using NAT. Can sometimes cause problems for non-NATed hosts (such as devices on the Public LAN). SIP: This feature understands the SIP protocol used by the specific applications and does a protocol packet-inspection of traffic through it. A NAT router with a built-in SIP ALG can re-write information within the SIP messages (SIP headers and SDP body) making signaling and audio traffic between the client behind NAT and the SIP endpoint possible. © 2017 ARRIS Enterprises, LLC. All rights reserved.
Home > Screenshots > Arris > NVG468MQ - Frontier > ALG Passthrough