Broadband Settings for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier



Screenshots from PortForward.com


Advanced - Broadband Settings NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Advanced Broadband Settings Connection Settings Coax (MoCA) LAN & DHCP DHCP Reservation Ethernet Ports IPv6 DNS Routing Voice Lines QoS Utilities Administration Remote GUI Configuration Firmware Logging Reboot Advanced - Broadband Settings You have disabled JavaScript(TM) in your browser. When you change an item that has an Update button to the right of it, make your change, then click the Update button. This will transform the page according to the change you have made and you may then proceed. Do not change the WAN Type setting unless instructed to do so by your Service Provider. WAN Type: Auto Select Ethernet WAN WAN Type Selected: ETHERNET Line Mode: Auto Select Line Mode Selected: UNTAGGED Transport Mode: Auto Select Transport Mode Selected: N/A Hide Help WAN Type: Often the system will automatically configure the WAN. If not, select the type of WAN you are connecting. Selecting a choice other than 'Auto Select' REQUIRES that you make related changes on the Connection Settings page, as all auto-detection will be stopped. Line Mode: Once the WAN Type has been determined, you may need to adjust the Line Mode. Transport Mode: Once the WAN Type and Line Mode have been determined, you may adjust the Transport Mode. VLAN ID: If your Line Mode or Transport Mode is tagged, you must enter the VLAN ID here. Legal values range from 0-4095. © 2017 ARRIS Enterprises, LLC. All rights reserved.
Home > Screenshots > Arris > NVG468MQ - Frontier > Broadband Settings