Gateway Resources for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier

Screenshots from

Status - Gateway Resources NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Status Summary Transport Connection LAN DHCP Routing ARP Table Voice Statistics Voice Summary UPnP NAT Wireless Gateway Resources Logs Status - Gateway Resources Auto Refresh Model: NVG468MQ Firmware: 9.2.0h3d78 Current Time: 16:57:03 Uptime: 06:00:46:09 CPU: Dual Core: 1500MHz CPU Utilization: Core0: 0.0209%, Core1: 0.0325%     Total Used Free Memory: 487MB 183MB / 37% 304MB / 63% Flash: 128MB 75MB / 58% 53MB / 42%     MAX TCP UDP Total Sessions 8192 27 26 53 / 0.6%   Device Protocol Destination Sessions TCP 1 TCP 1 UDP 1 UDP 1 TCP 1 UDP 1 TCP 1 TCP 1 UDP 1 UDP 1 TCP 1 UDP 1 TCP 1 TCP 1 TCP 1 TCP 1 UDP 1 TCP 1 UDP 1 TCP 1 UDP 1 UDP 1 TCP 1 UDP 1 UDP 1 TCP 1 TCP 1 UDP 1 Refresh Hide Help Model Number: Your gateway's manufacturing information. Firmware: The current firmware version of the embedded operating system. Current Time: If the WAN is up, timezone has been set, and NTP server has been found, this should be local time. Uptime: Days:Hours:Minutes:Seconds since the gateway was restarted. CPU, Memory, and Flash information resources are displayed. A table of client sessions connected to the gateway is displayed. Because the data is filtered, the session count may not agree with the number of lines shown in the session table. © 2017 ARRIS Enterprises, LLC. All rights reserved.
Home > Screenshots > Arris > NVG468MQ - Frontier > Gateway Resources