IPv6 for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier



Screenshots from PortForward.com


Advanced - IPv6 NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Advanced Broadband Settings Connection Settings Coax (MoCA) LAN & DHCP DHCP Reservation Ethernet Ports IPv6 DNS Routing Voice Lines QoS Utilities Administration Remote GUI Configuration Firmware Logging Reboot Advanced - IPv6 You have disabled JavaScript(TM) in your browser. When you change an item that has an Update button to the right of it, make your change, then click the Update button. This will transform the page according to the change you have made and you may then proceed.   IPv6 Enable: Enable Disable   WAN IPv6 Connection Type: IPv6 DHCP Client 6rd Tunnel   IPv6 Enable on LAN: Enable Disable   LAN IPv6 Connection Type: Delegated Prefix Static IP LAN IPv6 Address:   Hide Help IPv6 Enable: Enables IPv6 protocol. WAN IPv6 Connection Type: Selects the type of IPv6 configuration to use on the WAN. IPv6 Enable on LAN: Enables IPv6 on the LAN. LAN IPv6 Connection Type: Select either static IP or delegated prefix. If you are unsure, use delegated prefix, which is the default. LAN IPv6 Address: If LAN IPv6 type is static IP, then you can enter the IP address to be used. © 2017 ARRIS Enterprises, LLC. All rights reserved.