LAN and DHCP for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier

Screenshots from

Advanced - LAN & DHCP NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Advanced Broadband Settings Connection Settings Coax (MoCA) LAN & DHCP DHCP Reservation Ethernet Ports IPv6 DNS Routing Voice Lines QoS Utilities Administration Remote GUI Configuration Firmware Logging Reboot Advanced - LAN & DHCP Private LAN Subnet You have disabled JavaScript(TM) in your browser. When you change an item that has an Update button to the right of it, make your change, then click the Update button. This will transform the page according to the change you have made and you may then proceed. Gateway IPv4 Address: Subnet Mask: DHCP Server DHCP Server Enable: Off On DHCPv4 Start Address: DHCPv4 End Address: DHCP Lease: : : : Days : Hours : Minutes : Seconds Option 66: Custom Option:   Value: Custom Option:   Value: Public Subnet Public Subnet Mode: Public Subnet Proxy Subnet Off Allow Inbound Traffic: Off On Public Gateway Address: Public Subnet Mask: DHCPv4 Start Address: DHCPv4 End Address: Primary DHCP Pool: Private Public Cascaded Router Cascaded Router Enable On Off Cascaded Router Address Network Address Subnet Mask   Hide Help DHCP server functionality enables the gateway to assign a "private" IP address and other parameters that allow network communication to your LAN devices. This feature simplifies network administration because the gateway maintains a list of IP address assignments. IPv4 Address: Specifies the LAN IPv4 address of the gateway itself. Subnet Mask: Specifies the common Class C subnet. DHCP Server Enable: Specifies if the gateway will hand out leases to LAN-side clients. DHCPv4 Start Address: Specifies the first address in the DHCP address range. You can reserve a sequence of up to 253 IP addresses within a subnet, beginning with the specified address, for dynamic assignment. DHCPv4 End Address: Specifies the last address in the DHCP address range. DHCP Lease: Specifies the default length for DHCP leases issued by the gateway. Enter lease time in dd:hh:mm:ss format.The range must be 3 minutes to 99 days. Option 66: Enables the IP Address or hostname of a single TFTP server. Custom Option: Custom Options may be added one at a time. The option may be 1-254. The Value can be any text string. Public Subnet Mode: Using a public subnet means that IP addresses assigned to LAN clients will be public addresses. The Proxy Subnet feature is supported when the WAN is PPPoE. You should only use a Proxy Subnet if directed to by your service provider. Allow Inbound Traffic: When enabled, connections to LAN-side devices are allowed to be initiated from the WAN side. This opens the LAN devices on the Public Subnet to potentially malicious traffic, so care should be taken to ensure the LAN-side devices are properly protected. (Firewall-enabled) Public Gateway Address: The IP address of the public subnet. Public Subnet Mask: The subnet mask of the public subnet. Primary DHCP Pool Specifies which DHCP pool will be used first for the assignment of IP addresses to connecting devices. Cascaded Router Enable: When enabled, indicates another router will be behind this gateway. Cascaded Router Address: The IP address for the router behind this gateway. The Cascaded Router Address should be in the LAN Private IP subnet range. Use if IP Passthrough is enabled to have the cascaded router get the IP Passthrough address. Network Address: The Network Address that defines the range of IP addresses available to clients of the cascaded router. Subnet Mask: The subnet mask that with the Network Address defines the range of IP addresses available to clients of the cascaded router. © 2017 ARRIS Enterprises, LLC. All rights reserved.
Home > Screenshots > Arris > NVG468MQ - Frontier > LAN and DHCP