Remote GUI for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier

Screenshots from

Advanced - Remote GUI NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Advanced Broadband Settings Connection Settings Coax (MoCA) LAN & DHCP DHCP Reservation Ethernet Ports IPv6 DNS Routing Voice Lines QoS Utilities Administration Remote GUI Configuration Firmware Logging Reboot Advanced - Remote GUI   Remote Username: Remote Password: Remote Port: User Inactivity Timeout: 5 Minutes 10 Minutes 15 Minutes Feature Duration: Permanent 20 Minutes 1 Hour Permissions: Read-Write    Read-Only   Remote URL:   Access List Source IP Address: to Start IP Address End IP Address Delete Hide Help This feature allows you to give access to your gateway's web pages from the Internet. Remote Username: The username you will need to login. Remote Password: The password you will need to login. Remote Port: The port you will use to access the gateway UI from the WAN side. Port should be 6000-8000. User Inactivity Timeout: The period in minutes after which the gateway no longer considers you an active user. After the timeout expires, if you navigate to a gateway web page, you will need to login again. Feature Duration: For temporary remote access, this specifies the length of time that remote access is enabled. Permanent remote access means the feature will be enabled even after the gateway is restarted. Permissions: Read-only permissions mean that the remote access user cannot change the state of the gateway. Read-only users can visit protected pages, but cannot make changes. Read-write permissions mean that the remote access user can change the state of the gateway. Remote URL: Specifies the ip address and port in the format you use on most browsers. Access List The access list further restricts by IP Address those who can gain access to the gateway from the WAN. Source IP Address The IP Address or range of addresses allowed for remote access. If none are specified, all IP Addresses are allowed. © 2017 ARRIS Enterprises, LLC. All rights reserved.