Wireless MAC Address Control for the Arris NVG468MQ - FrontierRouter Sceenshot
Wireless - MAC Address Control NVG468MQ Version: 9.2.0h3d78 Logout WAN Link: Up Link Type: ONT WAN Link Speed: 1000 Mbps WAN Conn: Connected Conn Type: DHCP Client WAN IP: Wireless2G: Enabled SSID: Encryption: WPA2 Wireless5G: Enabled SSID: Encryption: WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Wireless Summary Basic Settings 2.4 GHz Basic Settings 5 GHz Guest Access 2.4 GHz Guest Access 5 GHz WPS MAC Address Control Wireless Schedule Advanced 2.4 GHz Advanced 5 GHz Wireless - MAC Address Control WARNING! When you make changes on this page the performance and service to associated Wi-Fi devices may be disrupted. 2.4 GHz Primary SSID Filtering: Disable Allow Deny Guest SSID Filtering: Disable Allow Deny 5 GHz Primary SSID Filtering: Disable Allow Deny Guest SSID Filtering: Disable Allow Deny Select Device: Add Device MAC Address Manually / / / / 192.168.254.150/ Manually Add MAC Address: 2.4 GHz Primary 2.4 GHz Guest 5 GHz Primary 5 GHz Guest No MAC Filter entries have been defined Hide Help
By enabling this feature you can limit wireless access to your gateway to a select group of Wi-Fi clients based on their unique Ethernet (MAC) addresses. This feature does not affect wired clients. MAC Filtering Type: Selecting "Allow" allows access to all clients in the MAC Filter List. Selecting "Deny" denies access to all clients in the MAC Filter List. MAC Filter Entry: Enter the hardware MAC address for the wireless client and click "Add". The Manual Entry is in nn:nn:nn:nn:nn:nn (hexadecimal) format. MAC Filter List: The MACs in this list are the filtered MACs. © 2017 ARRIS Enterprises, LLC. All rights reserved.