Wireless Status for the Arris NVG468MQ - FrontierRouter Sceenshot

Back to the Arris NVG468MQ - Frontier

Screenshots from PortForward.com

Status - Wireless NVG468MQ Version: 9.2.0h3d78 Logout WAN Link:   Up Link Type:   ONT WAN Link Speed:   1000 Mbps WAN Conn:   Connected Conn Type:   DHCP Client WAN IP:   Wireless2G:   Enabled SSID:   Encryption:   WPA2 Wireless5G:   Enabled SSID:   Encryption:   WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Status Summary Transport Connection LAN DHCP Routing ARP Table Voice Statistics Voice Summary UPnP NAT Wireless Gateway Resources Logs Status - Wireless Auto Refresh   2.4 GHz Radio 5 GHz Radio Wi-Fi Radio Status: operational operational Radio Channel: 11 (auto) 149 (auto) Primary SSID: Enabled Enabled SSID Availability: UP UP Network Name (SSID): Isolation: Disabled Disabled Broadcast SSID: Yes Yes Security: WPA2 WPA2 Password: 2136100666 2136100666   Guest SSID: Disabled Disabled SSID Availability: DOWN DOWN   Wi-Fi Network Statistics Transmit Bytes: 3222924039 3620014267 Receive Bytes: 1382598004 155658784 Transmit Packets: 9929118 3097910 Receive Packets: 4758352 1163218 Transmit Error Packets: 0 0 Receive Error Packets: 0 29 Transmit Discard Packets: 0 1499 Receive Discard Packets: 0 0   Wi-Fi Client Connection Statistics MAC Address IP Address State Access Point RSSI Connected 2.4GHz Radio: -74 dBm Connected 2.4GHz Radio: -63 dBm Disconnected 2.4GHz Radio: N/A Connected 2.4GHz Radio: -66 dBm Disconnected 2.4GHz Radio: N/A Hide Help Wi-Fi Radio Status: Indicates whether or not the wireless interface is enabled and working. Radio Channel: The channel on which the wireless radio is operating. Primary/Guest SSID: A wireless client connected to a Primary SSID may be able to communicate with other devices on that SSID and elsewhere on the LAN, as well as connect to the Internet. A wireless client connected to a Guest SSID can connect to the Internet, but it cannot communicate with other devices. SSID Availability: This status indicates whether the SSID can be accessed by a wireless client, taking into account if the radio is enabled and functional, if the ssid is enabled, if the Wireless Scheduler is enabled, if the Wireless Scheduler is enabled for the SSID, and if the schedule time is blocked/allowed. Network Name (SSID): This name should appear when a wireless client searches for available networks. Isolation: When enabled, wireless clients on a given SSID cannot communicate with each other. Broadcast SSID: If enabled, the gateway's network name above will appear in wireless client searches. Security: The security mechanism between the gateway and its clients. Password: The Wi-Fi password, if security is WPA or WEP. Wi-Fi Network Statistics: Statistics collected since the last restart of the gateway. Clear: This button clears wireless statistics, but the counters immediately begin counting again, so you may or may not see values display as zeroes. Restart Wireless Radio: This turns wireless off, then on again. This restarts the drivers of the selected interface and temporarily disconnects wireless users. Wi-Fi Client Connection Statistics Information is displayed for each wi-fi client known by the gateway. Wireless Site Survey Brings the user to a page where congestion detection and channel scans can be performed. © 2017 ARRIS Enterprises, LLC. All rights reserved.
Home > Screenshots > Arris > NVG468MQ - Frontier > Wireless Status