Wireless WPS for the Arris NVG468MQ - FrontierRouter Sceenshot
Wireless - WPS NVG468MQ Version: 9.2.0h3d78 Logout WAN Link: Up Link Type: ONT WAN Link Speed: 1000 Mbps WAN Conn: Connected Conn Type: DHCP Client WAN IP: Wireless2G: Enabled SSID: Encryption: WPA2 Wireless5G: Enabled SSID: Encryption: WPA2 Skip to Main Content Main Wireless Network Firewall Advanced Status Wireless Summary Basic Settings 2.4 GHz Basic Settings 5 GHz Guest Access 2.4 GHz Guest Access 5 GHz WPS MAC Address Control Wireless Schedule Advanced 2.4 GHz Advanced 5 GHz Wireless - WPS Radio Selection: 2.4 GHz Radio 5 GHz Radio Wi-Fi Protected Setup: Enable Disable Generate PIN WPS PIN Choose from the Radio Selection pulldown, enter the Wi-Fi Client's all digit PIN, Submit, then follow the Wi-Fi client instructions. WPS PIN: e.g. 12345670 WPS Virtual Pushbutton Choose from the Radio Selection pulldown, click the pushbutton, then follow the Wi-Fi client instructions. Hide Help Radio Selection: WPS may be enabled on one radio at a time. Choose which wireless radio you want to enable WPS. The features below will be inoperable when WPS is disabled. Generate PIN: A unique 8 digit PIN is generated. WPS PIN: Enter an all digit PIN, click the Submit button, then follow any instructions that came with your wireless client. WPS Virtual Pushbutton: This software pushbutton operates in the same way as the hardware WPS pushbutton on the gateway unit. © 2017 ARRIS Enterprises, LLC. All rights reserved.